DISCLAIMER: No guard can protect your equipment from all possible types of collisions. flatland3d makes no guarantees of protecting any part of your board, remote, or other equipment from damage in the event of a collision. If you have any issues with our products, please don’t hesitate to reach out to us at info@flatland3d.com. Our Bash Guards and other equipment guards are not safety devices. They do not protect the rider in any way. Skateboarding of any kind is a dangerous sport. Always wear a helmet, and live to ride another day!
NOTICE REGARDING SAFETY EQUIPMENT: The flatland3d e-skate glove has been designed and tested to reduce the risk of a specific type of injury sustained during typical skateboarding falls. They are not to be used for any other purposes including, but not limited to: performing highly dangerous stunts, subjecting them to extreme impact, or using them for any commercial applications whatsoever. While every effort has been made to ensure that our products meet your reasonable satisfaction, we cannot guarantee that our products will protect you in all circumstances.
INTERNATIONAL SHIPPING (Customs, Duties & Taxes): Orders shipped outside of the United States may be subject to import taxes, customs duties and fees levied by the destination country. The recipient of an international shipment may be subject to such import taxes, customs duties and fees, which are levied once a shipment reaches the recipient’s country. Additional charges for customs clearance must be fulfilled by the recipient; flatland3d has no control over these charges, nor can flatland3d predict what they may be. flatland3d is unable to mark shipments as gifts or adjust declared values on international shipments. Customs policies vary widely from country to country; you should contact your local customs office for more information. When customs clearance procedures are required, it can cause delays beyond our original delivery estimates. Note: Customs offices in some countries require the importer of record (recipient) to provide a particular form of identification before releasing a shipment. You may be required to provide an identification number such as a Unique Identification Number, CPF, or Tax ID. Countries that require an identification number include: Brazil, Chile, China, Ecuador, India, Israel, Peru, Qatar, South Africa, South Korea, Taiwan, and Turkey.
WARRANTY: flatland3d offers a 12 month limited warranty against manufacturing defects. flatland3d will make the final judgement at their discretion to whether any damage qualifies as a defect, or is normal wear and tear. If it is determined a defect exists, flatland3d will repair or replace the damaged part free of charge, within a reasonable amount of time. Reach out to us at info@flatland3d.com if you have questions about our warranty or to make a claim.
RETURN POLICY: Should you decide to return your purchase, flatland3d will accept returns on unused products for a full refund. Use the same packaging, or repack the items carefully to avoid shipping damage, and send them our way. Once we receive the items, we will refund the full purchase price and the original shipping charge. The customer is responsible for return shipping. Packages sent from outside the U.S. should be marked as RETURNS on the outside of the package. Email us at info@flatland3d.com to begin the return process and for our return shipping address.
E-SKATE GLOVE SIZING GUARANTEE: In most cases, our sizing chart will help you select the proper size for your hands. Our E-Skate Gloves should fit snug (but not uncomfortably tight) everywhere, including around the palm and through the fingers. If you receive your gloves and the size doesn’t seem just right, please let us know. If we determine you need a different size, we can send you a prepaid return shipping label, and exchange for the proper size, at no cost to you. Reach out to us at info@flatland3d.com for more info about our E-Skate Glove Sizing Guarantee, or to get started.
LIABILITY: flatland3d shall not be liable for any personal injury you suffer as a result of using our products except to the extent such injury is caused by our negligence. You agree that flatland3d products are used at your own risk and flatland3d products do not claim to protect you from any or all personal injury which may occur during their use.
Product Description
The Carbon E-Skate Glove from flatland3d and Knox is the world’s most advanced full finger glove designed specifically for electric skateboarding. The Carbon features Knox’s Scaphoid Protection System (SPS) with Micro-Lock impact foam, and a Uni-directional Flexible Wrist Plate. The Fingerless Pro E-Skate Glove offers the most advanced protection from a glove, without sacrificing safe and comfortable use of your e-skate remote.
What is Knox SPS?
Knox patented Scaphoid Protection System (SPS) works to protect your palm and wrist by adding two sliders to the palm of the glove. One of the sliders sits over the general area of the scaphoid, and the second slider acts as a bridge, stopping the grab and twist effect. This system protects the hand from compression fractures and hyper-extension, caused when a typical glove grips the road surface and forward momentum carries the rider’s body over the hand. The SPS sliders now have Knox Micro-Lock impact protection built in, providing the same abrasion resistance as the original, but with additional impact protection.
Features:
Knox Patented SPS (Scaphoid Protection System) with Micro-Lock Impact Protection
Removable Uni-directional Flexible Wrist Plate. Flexible in the forward direction for maximum comfort, rigid in the other direction to prevent hyperextension
Clarino synthetic leather with Hex Grip overlay on the palm and contact points for remote grip and dexterity
Knox Lift & Lock wrist closure for an easy and secure fit
Wrap around, seamless finger ends in Amara Touch-Screen material
Abrasion resistant hex knuckle guards
Double reinforced carbon fiber thread stitching at critical seams
Reflective overlay on fingertips, reflective logo on small finger, and reflective piping on back of hand for added visibility
Heavy duty webbing loop with accent stitching at wrist makes it easy to pull the glove on, and doubles as a sturdy loop for hanging from a carabiner or hook
Sizing:
Size
XS
S
M
L
XL
XXL
Inches
7
8
9
9.5
10
11
MM
180
200
220
245
260
280
Carbon E-Skate Glove Sizing Guarantee
In most cases, the sizing chart above will help you select the proper size for your hands. The Fingerless Pro E-Skate Gloves should fit snug (but not uncomfortably tight). If you receive your gloves and the size doesn’t seem just right, please let us know. If we determine you need a different size, we can send you a prepaid return shipping label, and exchange for the proper size, at no cost to you. Reach out to us at info@flatland3d.com for more info about our Fingerless Pro E-Skate Glove Sizing Guarantee, or to get started.
The Carbon E-Skate Glove from flatland3d and Knox is the world’s most advanced full finger glove designed specifically for electric skateboarding. The Carbon features Knox’s Scaphoid Protection System (SPS) with Micro-Lock impact foam, and a Uni-directional Flexible Wrist Plate. The Fingerless Pro E-Skate Glove offers the most advanced protection from a glove, without sacrificing safe and comfortable use of your e-skate remote.
What is Knox SPS?
Knox patented Scaphoid Protection System (SPS) works to protect your palm and wrist by adding two sliders to the palm of the glove. One of the sliders sits over the general area of the scaphoid, and the second slider acts as a bridge, stopping the grab and twist effect. This system protects the hand from compression fractures and hyper-extension, caused when a typical glove grips the road surface and forward momentum carries the rider’s body over the hand. The SPS sliders now have Knox Micro-Lock impact protection built in, providing the same abrasion resistance as the original, but with additional impact protection.
Features:
Knox Patented SPS (Scaphoid Protection System) with Micro-Lock Impact Protection
Removable Uni-directional Flexible Wrist Plate. Flexible in the forward direction for maximum comfort, rigid in the other direction to prevent hyperextension
Clarino synthetic leather with Hex Grip overlay on the palm and contact points for remote grip and dexterity
Knox Lift & Lock wrist closure for an easy and secure fit
Wrap around, seamless finger ends in Amara Touch-Screen material
Abrasion resistant hex knuckle guards
Double reinforced carbon fiber thread stitching at critical seams
Reflective overlay on fingertips, reflective logo on small finger, and reflective piping on back of hand for added visibility
Heavy duty webbing loop with accent stitching at wrist makes it easy to pull the glove on, and doubles as a sturdy loop for hanging from a carabiner or hook
Sizing:
Size
XS
S
M
L
XL
XXL
Inches
7
8
9
9.5
10
11
MM
180
200
220
245
260
280
Carbon E-Skate Glove Sizing Guarantee
In most cases, the sizing chart above will help you select the proper size for your hands. The Fingerless Pro E-Skate Gloves should fit snug (but not uncomfortably tight). If you receive your gloves and the size doesn’t seem just right, please let us know. If we determine you need a different size, we can send you a prepaid return shipping label, and exchange for the proper size, at no cost to you. Reach out to us at info@flatland3d.com for more info about our Fingerless Pro E-Skate Glove Sizing Guarantee, or to get started.
Reviews
There are no reviews yet.