• Sorry, this product cannot be purchased.
Sale
Classic Fingerless E-Skate Glove
Classic Fingerless E-Skate Glove
Classic Fingerless E-Skate Glove
Classic Fingerless E-Skate Glove
Classic Fingerless E-Skate Glove
Classic Fingerless E-Skate Glove
Classic Fingerless E-Skate Glove
Classic Fingerless E-Skate Glove
Classic Fingerless E-Skate Glove
Classic Fingerless E-Skate GloveClassic Fingerless E-Skate GloveClassic Fingerless E-Skate GloveClassic Fingerless E-Skate GloveClassic Fingerless E-Skate GloveClassic Fingerless E-Skate GloveClassic Fingerless E-Skate GloveClassic Fingerless E-Skate GloveClassic Fingerless E-Skate Glove

The Classic

$49.99

5.00 out of 5 based on 4 customer ratings
(4 customer reviews)

 

DISCLAIMER: No guard can protect your equipment from all possible types of collisions. flatland3d makes no guarantees of protecting any part of your board, remote, or other equipment from damage in the event of a collision. If you have any issues with our products, please don’t hesitate to reach out to us at info@flatland3d.com. Our Bash Guards and other equipment guards are not safety devices. They do not protect the rider in any way. Skateboarding of any kind is a dangerous sport. Always wear a helmet, and live to ride another day!

NOTICE REGARDING SAFETY EQUIPMENT: The flatland3d e-skate glove has been designed and tested to reduce the risk of a specific type of injury sustained during typical skateboarding falls. They are not to be used for any other purposes including, but not limited to: performing highly dangerous stunts, subjecting them to extreme impact, or using them for any commercial applications whatsoever. While every effort has been made to ensure that our products meet your reasonable satisfaction, we cannot guarantee that our products will protect you in all circumstances.

INTERNATIONAL SHIPPING (Customs, Duties & Taxes): Orders shipped outside of the United States may be subject to import taxes, customs duties and fees levied by the destination country. The recipient of an international shipment may be subject to such import taxes, customs duties and fees, which are levied once a shipment reaches the recipient’s country. Additional charges for customs clearance must be fulfilled by the recipient; flatland3d has no control over these charges, nor can flatland3d predict what they may be. flatland3d is unable to mark shipments as gifts or adjust declared values on international shipments. Customs policies vary widely from country to country; you should contact your local customs office for more information. When customs clearance procedures are required, it can cause delays beyond our original delivery estimates. Note: Customs offices in some countries require the importer of record (recipient) to provide a particular form of identification before releasing a shipment. You may be required to provide an identification number such as a Unique Identification Number, CPF, or Tax ID. Countries that require an identification number include: Brazil, Chile, China, Ecuador, India, Israel, Peru, Qatar, South Africa, South Korea, Taiwan, and Turkey.

WARRANTY: flatland3d offers a 12 month limited warranty against manufacturing defects. flatland3d will make the final judgement at their discretion to whether any damage qualifies as a defect, or is normal wear and tear. If it is determined a defect exists, flatland3d will repair or replace the damaged part free of charge, within a reasonable amount of time. Reach out to us at info@flatland3d.com if you have questions about our warranty or to make a claim.

RETURN POLICY: Should you decide to return your purchase, flatland3d will accept returns on unused products for a full refund. Use the same packaging, or repack the items carefully to avoid shipping damage, and send them our way. Once we receive the items, we will refund the full purchase price and the original shipping charge. The customer is responsible for return shipping. Packages sent from outside the U.S. should be marked as RETURNS on the outside of the package. Email us at info@flatland3d.com to begin the return process and for our return shipping address.

E-SKATE GLOVE SIZING GUARANTEE: In most cases, our sizing chart will help you select the proper size for your hands. The E-Skate Gloves should fit snug (but not uncomfortably tight) everywhere, including around the palm and through the fingers. If you receive your gloves and the size doesn’t seem just right, please let us know. If we determine you need a different size, we can send you a prepaid return shipping label, and exchange for the proper size, at no cost to you. Reach out to us at info@flatland3d.com for more info about our E-Skate Glove Sizing Guarantee, or to get started.

LIABILITY: flatland3d shall not be liable for any personal injury you suffer as a result of using our products except to the extent such injury is caused by our negligence. You agree that flatland3d products are used at your own risk and flatland3d products do not claim to protect you from any or all personal injury which may occur during their use.

Product Description

The spirit of the original electric skateboarding glove is back in the newly redesigned Classic Fingerless E-Skate Glove. 

flatland3d and Knox have teamed up once again to bring you the essential features needed in a glove designed specifically for e-skate and other personal electric vehicle riders, in the original streamlined minimalist form factor that started it all. The Classic features Knox’s Scaphoid Protection System (SPS). Protect your wrists without sacrificing safe and comfortable use of your e-skate remote, e-scooter or e-bike handlebar controls, phone, vlogging rig, or morning latte.

What is Knox SPS?

Knox patented Scaphoid Protection System (SPS) works to protect your palm and wrist by adding two sliders to the palm of the glove. One of the sliders sits over the general area of the scaphoid, and the second slider acts as a bridge, stopping the grab and twist effect. This system protects the hand from compression fractures and hyper-extension, caused when a typical glove grips the road surface and forward momentum carries the rider’s body over the hand.

 

SPS Diagram

Features:

  • Knox Patented SPS (Scaphoid Protection System)
  • Clarino synthetic leather breathable performance palm
  • 4 way stretch mesh and Spandex across the back of the hand for flexibility and breathability
  • Abrasion resistant finger guards
  • Terry cloth thumb panel to use as a wipe
  • Reflective stripe across back of hand for added visibility
  • Heavy duty webbing loop at wrist makes it easy to pull the glove on, and doubles as a sturdy loop for hanging from a carabiner or hook
  • Hook and loop closure at the wrist for a secure fit

 

Sizing:

Size XS S M L XL XXL
Inches 7 8 9 9.5 10 11
MM 180 200 220 245 260 280
How to Measure the Hand

E-Skate Glove Sizing Guarantee

In most cases, the sizing chart above will help you select the proper size for your hands. The Classic Fingerless E-Skate Gloves should fit snug (but not uncomfortably tight). If you receive your gloves and the size doesn’t seem just right, please let us know. If we determine you need a different size, we can send you a prepaid return shipping label, and exchange for the proper size, at no cost to you. Reach out to us at info@flatland3d.com for more info about our E-Skate Glove Sizing Guarantee, or to get started.


Subscribe to Updates

Product Description

The spirit of the original electric skateboarding glove is back in the newly redesigned Classic Fingerless E-Skate Glove. 

flatland3d and Knox have teamed up once again to bring you the essential features needed in a glove designed specifically for e-skate and other personal electric vehicle riders, in the original streamlined minimalist form factor that started it all. The Classic features Knox’s Scaphoid Protection System (SPS). Protect your wrists without sacrificing safe and comfortable use of your e-skate remote, e-scooter or e-bike handlebar controls, phone, vlogging rig, or morning latte.

What is Knox SPS?

Knox patented Scaphoid Protection System (SPS) works to protect your palm and wrist by adding two sliders to the palm of the glove. One of the sliders sits over the general area of the scaphoid, and the second slider acts as a bridge, stopping the grab and twist effect. This system protects the hand from compression fractures and hyper-extension, caused when a typical glove grips the road surface and forward momentum carries the rider’s body over the hand.

 

SPS Diagram

Features:

  • Knox Patented SPS (Scaphoid Protection System)
  • Clarino synthetic leather breathable performance palm
  • 4 way stretch mesh and Spandex across the back of the hand for flexibility and breathability
  • Abrasion resistant finger guards
  • Terry cloth thumb panel to use as a wipe
  • Reflective stripe across back of hand for added visibility
  • Heavy duty webbing loop at wrist makes it easy to pull the glove on, and doubles as a sturdy loop for hanging from a carabiner or hook
  • Hook and loop closure at the wrist for a secure fit

 

Sizing:

Size XS S M L XL XXL
Inches 7 8 9 9.5 10 11
MM 180 200 220 245 260 280
How to Measure the Hand

E-Skate Glove Sizing Guarantee

In most cases, the sizing chart above will help you select the proper size for your hands. The Classic Fingerless E-Skate Gloves should fit snug (but not uncomfortably tight). If you receive your gloves and the size doesn’t seem just right, please let us know. If we determine you need a different size, we can send you a prepaid return shipping label, and exchange for the proper size, at no cost to you. Reach out to us at info@flatland3d.com for more info about our E-Skate Glove Sizing Guarantee, or to get started.


Additional Information

Weight N/A
Size

X-Small, Small, Medium, Large, X-Large, XX-Large

4 reviews for The Classic

  1. Zach (verified owner)

    I own both the OG fingerless and the new Classic fingerless. They have saved me from serious hand/wrist injuries in a couple of crashes. They are super easy and quick to put on and take off and can be easily stored in a pocket or inside a helmet. 11/10 best safety gear purchase I’ve ever made.

  2. Abby (verified owner)

    Honestly best gloves for onewheel. Just wish they had full finger gloves for riding in the cold

  3. Ross (verified owner)

    Waiting until I used them fully for the review. Crashed and worked exactly as intended. Even slide with the weight of me and a moderately heavy pack on. The plastic is thick enough for several crashes or a serious one.

    They are very comfortable and fit my hand well, the tabs are a nice bonus. The material is very soft, yet thick enough to withstand abrasions.

    Absolutely recommend this, it is not as good as wrist guard, but it’s all about what is easy to wear, and these are a very comfortable glove.

  4. ruvyim_96 (verified owner)

    These gloves fit perfectly and are super soft. I’ve very satisfied with them. I bought this glove and the bigger version. I’ve tried to find something to keep me and my girlfriend safe while we use our E-Bikes, this is definitely it. HIGHLY recommend them and Steve with customer service has been so easy to work with and very professional! Highly recommend Flatland3d

Add a review