Bash Guard M
Bash Guard M – Black Pronger
bash guard M – Black Rounder
Bash Guard M – Orange Pronger
Bash Guard M – Orange Rounder
Bash Guard M
Bash Guard M
Bash Guard M – Cable Clips
Bash Guard M
Bash Guard M
Stealth with Bash Guard M’s and ShredLights
Stealth with Bash Guard M’s and ShredLights
Stealth with Bash Guard M’s and ShredLights
Stealth with Bash Guard M’s and ShredLights
Stealth with Bash Guard M’s and ShredLights
Bash Guard MBash Guard MBash Guard MBash Guard MBash Guard MBash Guard MBash Guard MBash Guard M - Cable ClipsBash Guard MBash Guard MStealth with Bash Guard M's and ShredLightsStealth with Bash Guard M's and ShredLightsStealth with Bash Guard M's and ShredLightsStealth with Bash Guard M's and ShredLightsStealth with Bash Guard M's and ShredLights

Bash Guard M (single) – for Boosted Boards

$15.00

5.00 out of 5 based on 3 customer ratings
(3 customer reviews)

 

DISCLAIMER:

No guard can protect your equipment from all possible types of collisions. flatland3d makes no guarantees of protecting any part of your board, remote, or other equipment from damage in the event of a collision. If you have any issues with our products, please don’t hesitate to reach out to us at info@flatland3d.com. Our Bash Guards and other equipment guards are not safety devices. They do not protect the rider in any way. Skateboarding of any kind is a dangerous sport. Always wear a helmet, and live to ride another day!

NOTICE REGARDING SAFETY EQUIPMENT:

The flatland3d e-skate glove has been designed and tested to reduce the risk of a specific type of injury sustained during typical skateboarding falls. They are not to be used for any other purposes including, but not limited to: performing highly dangerous stunts, subjecting them to extreme impact, or using them for any commercial applications whatsoever. While every effort has been made to ensure that our products meet your reasonable satisfaction, we cannot guarantee that our products will protect you in all circumstances.

INTERNATIONAL SHIPPING (Customs, Duties & Taxes):

Orders shipped outside of the United States may be subject to import taxes, customs duties and fees levied by the destination country. The recipient of an international shipment may be subject to such import taxes, customs duties and fees, which are levied once a shipment reaches the recipient’s country. Additional charges for customs clearance must be fulfilled by the recipient; flatland3d has no control over these charges, nor can flatland3d predict what they may be. flatland3d is unable to mark shipments as gifts or adjust declared values on international shipments. Customs policies vary widely from country to country; you should contact your local customs office for more information. When customs clearance procedures are required, it can cause delays beyond our original delivery estimates.
Note:
Customs offices in some countries require the importer of record (recipient) to provide a particular form of identification before releasing a shipment. You may be required to provide an identification number such as a Unique Identification Number, CPF, or Tax ID. Countries that require an identification number include: Brazil, Chile, China, Ecuador, India, Israel, Peru, Qatar, South Africa, South Korea, Taiwan, and Turkey.

WARRANTY:

flatland3d offers a 12 month limited warranty against manufacturing defects. flatland3d will make the final judgement at their discretion to whether any damage qualifies as a defect, or is normal wear and tear. If it is determined a defect exists, flatland3d will repair or replace the damaged part free of charge, within a reasonable amount of time. Reach out to us at info@flatland3d.com if you have questions about our warranty or to make a claim.

RETURN POLICY:

Should you decide to return your purchase, flatland3d will accept returns on unused products for a full refund. Use the same packaging, or repack the items carefully to avoid shipping damage, and send them our way. Once we receive the items, we will refund the full purchase price and the original shipping charge. The customer is responsible for return shipping. Packages sent from outside the U.S. should be marked as RETURNS on the outside of the package. Email us at info@flatland3d.com to begin the return process and for our return shipping address.

LIABILITY:

flatland3d shall not be liable for any personal injury you suffer as a result of using our products except to the extent such injury is caused by our negligence.
You agree that flatland3d products are used at your own risk and flatland3d products do not claim to protect you from any or all personal injury which may occur during their use.

Product Description

This updated version of the Original Bash Guard from flatland3d is now made from injection molded ABS plastic for a smoother, more streamlined outer aesthetic. This new design provides the same protection and function you’ve come to expect from flatland3d. Designed as a direct replacement for the stock riser on your Boosted Board V2, the Bash Guard M will provide protection to the nose or tail of your deck without any effect to the ride feel or dynamics. flatland3d Bash Guards are also compatible with V1 boards, as well as the new Stealth and Plus models (take a look at our Extended Riser if you’ve got a V3 longboard). Available in our Pronged or Rounded styles, and choose Orange, Black or the new “Fresh Green.” The Bash Guard M is sold individually, and it’s in stock now and ready to ship!

Check out our How-To section to see how it all goes together.

Peripherals

Indicate where each individual Bash Guard will be mounted to be sure you get the correct peripherals (included for free):

  • Set of 2 Cable Clip M’s if it’s for the tail of a V2 (or Stealth or Plus)
  • no extras needed for the nose of V2 (or Stealth or Plus)
  • 1/16″ Hard Riser if it’s for a V1

 

NOTE – Stealth, Plus, and V2 extended range battery riders:

If you want to match the taller stock risers (more ground clearance for your extended range battery), and also want to use flatland3d Bash Guards, we recommend using our Extended Riser along with your Bash Guard.


Clear

Subscribe to Updates

Product Description

This updated version of the Original Bash Guard from flatland3d is now made from injection molded ABS plastic for a smoother, more streamlined outer aesthetic. This new design provides the same protection and function you’ve come to expect from flatland3d. Designed as a direct replacement for the stock riser on your Boosted Board V2, the Bash Guard M will provide protection to the nose or tail of your deck without any effect to the ride feel or dynamics. flatland3d Bash Guards are also compatible with V1 boards, as well as the new Stealth and Plus models (take a look at our Extended Riser if you’ve got a V3 longboard). Available in our Pronged or Rounded styles, and choose Orange, Black or the new “Fresh Green.” The Bash Guard M is sold individually, and it’s in stock now and ready to ship!

Check out our How-To section to see how it all goes together.

Peripherals

Indicate where each individual Bash Guard will be mounted to be sure you get the correct peripherals (included for free):

  • Set of 2 Cable Clip M’s if it’s for the tail of a V2 (or Stealth or Plus)
  • no extras needed for the nose of V2 (or Stealth or Plus)
  • 1/16″ Hard Riser if it’s for a V1

 

NOTE – Stealth, Plus, and V2 extended range battery riders:

If you want to match the taller stock risers (more ground clearance for your extended range battery), and also want to use flatland3d Bash Guards, we recommend using our Extended Riser along with your Bash Guard.


Additional Information

Weight N/A
Style

Pronger (1x), Rounder (1x)

Color

Orange, Black, Fresh Green

Mounting location

V2 Tail (Free Cable Clip M's included), V2 Nose (no extras needed), V1 Nose or Tail (Free 3d printed 1/16" Hard Riser included)

3 reviews for Bash Guard M (single) – for Boosted Boards

  1. Rated 5 out of 5

    (verified owner)

    They fit like a glove on my Dual Plus v2 and look great!

  2. Rated 5 out of 5

    (verified owner)

    great fit for the tail of my boosted v2.. now i dont have to worry about chipping it when i have it standing up leaned up

  3. Rated 5 out of 5

    (verified owner)

    Ordered the green rounder bash guard in hopes that it would fit the front of my DIY board that has a similar nose to the boosted boards and it ended up working perfectly! It protrudes slightly from the nose of my board, no longer have to worry about damaging my board if it hits something or I stand it on end. The green color is a very close match to my ABEC 11 107mm Flywheels, great quality part, couldn’t be happier!

Add a review

Your email address will not be published. Required fields are marked *

Are you human? *